Kenel Board Type |
Connector |
Stamp hole |
| Advantage |
Convenient disassembly and installation, good expansibility. |
Suitable for high vibration
|
| Size
|
50mm*60mm |
50mm*60mm |
| PCB |
6 layers PCB |
8 layer PCB |
| Connector height
|
The combined height of the connector is 1.5mm |
|
| 4418 CPU |
ARM Cortex-A9 quad-core S5P4418 processor 1.4GHz |
ARM Cortex-A9 quad-core S5P4418 processor 1.4GHz |
| 6818 CPU |
ARM Cortex-A53 octa-core S5P6818 processor 1.4GHz |
ARM Cortex-A53 octa-core S5P6818 processor 1.4GHz |
| RAM |
1GB DDR3（2GB Optional
） |
1GB DDR3 |
| Flash |
16GB EMMC |
16GB EMMC |
| Power management |
The AXP228 (official recommendation match) supports dynamic frequency modulation and ultra-low power consumption. |
The AXP228 (official recommendation match) supports dynamic frequency modulation and ultra-low power consumption. |
| Voltage Input |
5V |
5V |
| OS |
Android4.4/5.1.1/7.1、Linux3.4.39、QT2.2/4.7/5.7、Ubuntu12.04 |
Android4.4/5.1.1/7.1、Linux3.4.39、QT2.2/4.7/5.7、Ubuntu12.04 |
| PIN |
320 PIN |
208 PIN |
| Operating temperature
|
-0℃ to +70℃ |
-0℃ to +70℃ |
| Extension parameters
|
LCD：24-bit RGB 888;
LVDS: 4-channel, configurable;
HDMI：v1.4;
MIPI：DSI and CSI each, support LCD and Camara;
DVP：Can support DVP format parallel camera;
SDIO：3 x SDIO (1 road is occupied);
USB_HOST：1 x USB_HOST;
USB_OTG：1 x USB_OTG;
USB_HSIC：1 x USB_HSIC;
UART：6 multiplexing;
I2C：3 x I2C，Can be used for touch screen, etc;
SPDIF：1 x SPDIF;
GPIO：Most have been derived;
SPI：3 x SPI，Can be used for CAN extensions;
Ethernet：1 channel adaptive gigabit;
PWM：3 x PWM;
Lithium battery charge and discharge: lead, can be directly used (with a meter);
ADC：7 analog inputs;
JTAG：1 x JTAG;
|
LCD：24-bit RGB 888, can be selected according to screen requirements;
LVDS：4 channels, configurable;
HDMI：v1.4；
MIPI：DSI and CSI each, support LCD and Camara;
DVP：Can support DVP format parallel camera;
SDIO：3 x SDIO（Route 1 is occupied）;
USB_HOST：1 x USB_HOST, base plate expansion 2;
USB_OTG：1 x USB_OTG;
UART：6 x UART;
I2C：3 x I2C;
SPDIF：1 x SPDIF;
GPIO：Most have been derived;
SPI：3 x SPI;
Ethernet：1-way adaptive 10/100/1000;
PWM：3 x PWM;
Lithium battery charge and discharge
：Lead out, can be directly used (with a meter);
ADC：7 analog inputs;
|
Plate Type
|
Connector |
Stamp hole |
| Size |
125mm * 190mm |
125mm * 190mm |
| PCB |
4 layer PCB design
|
4 layer PCB design
|
| EEPROM |
A 4MB EEPROM, used to store critical data.
|
A 4MB EEPROM, used to store critical data.
|
| POWER |
5V/2A |
5V/2A |
| Charge-discharge interface |
1, can be connected to common lithium battery, with a battery meter |
1, can be connected to common lithium battery, with a battery meter |
| SWITCH |
Power Interface |
Power Interface |
| DIP SWITCH |
3 bit dialing switch
|
3 bit dialing switch
|
| A/D |
Support |
Support |
| JTAG |
1 x JTAG |
/ |
| CAMERA |
1 x DVP (can support 5 million cameras); |
1 x DVP (can support 5 million cameras); |
| GPIO/CAN/RS485 |
1 x CAN;1 x RS485 |
1 x CAN;1 x RS485 |
| User Key |
6 x User Key |
6 x User Key |
| SDIO/GPIO |
/ |
1 x 20PIN |
| IRDA |
1 x IRDA |
1 x IRDA |
| MIC |
1 x MIC |
1 x MIC |
| PHONE |
1 x PHONE |
1 x PHONE |
| UART |
2 x 232; 2 x TTL |
2 x 232; 2 x TTL |
| USB Host |
3 x USB Host |
3 x USB Host |
| TF Card |
1 x TF Card |
1 x TF Card |
| 4G |
All Netcom (optional)
|
All Netcom (optional)
|
| WIFI Module |
Support (S500M) |
Support (S500M) |
| GPS module |
Supported (optional)
|
Supported (optional)
|
| Ethernet |
1-way adaptive 10/100/1000 |
1-way adaptive 10/100/1000 |
| LCD interface
|
1 x LVDS, 1 x RGB |
1 x LVDS, 1 x RGB |
| MIPI |
1 x MIPI |
/ |
| HDMI |
1 x HDMI v1.4，1080p |
1 x HDMI v1.4，1080p |
| USB OTG |
1 x USB OTG 2.0 |
1 x USB OTG 2.0 |
| RTC座 |
1个 |
1个 |
| Multimedia coding
|
Support H.263 H.264 MPEG and other audio formats |
Support H.263 H.264 MPEG and other audio formats |
